RE: sripped timing pulley

["BHonnold" <bhonnold@pac-cap.com>]

If you stripped the stud it can be extracted just like a exhaust manifold
stud and a new one threaded in.  If somehow you have stripped the hole in
the head that the stud goes in, you will need to helicoil like you said.

I have also heard of people drilling and tapping a new hole for the stud
after welding up the old hole and drilling a new one very very near to it.

HTH

Brian H



> -----Original Message-----
> From: owner-scirocco-l@scirocco.org
> [mailto:owner-scirocco-l@scirocco.org]On Behalf Of andkat
> Sent: Saturday, May 05, 2001 8:19 AM
> To: Scirocco List
> Subject: sripped timing pulley
>
>
> Anybody ever stripped the adjustable timing belt pulley in the
> head?  If so
> how did you fix it, helicoil, keensert?
>
> Might not be going to N.D. after all.........
>
> Andy
>
>
> --
> Email LIST problems to: scirocco-l-probs@scirocco.org.
> To unsubscibe send "unsubscribe scirocco-l" in the message to
> majordomo@scirocco.org
>


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org