[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 100mm vs 90mm...?



There was discussion about this a while ago...I forget what
the concensis was (alot of stuff like can you mix and match
100mm inner/90mm outer... etc...)  But if you what to use
100mm shafts go all the way and upgrade the outers to 100mm
as well which wil require you upgrade the knuckles to 16v
rocco specs..

no flames please...


--- Jody Bailey <scirocco8v@home.com> wrote:
> Okay so I have just been wondering.  Since I have to buy
> a pair of half
> shafts for my 82 Scirocco (90mm hubs) and I have a set of
> 100mm hubs sitting
> in my garage, would it be benificial for me to swap in
> the 100mm hubs and
> buy 100mm driveshafts?  Would the 100mm setup weigh much
> more?  I have a 2L
> 8v with a worked head but I don't think snapping
> driveshafts will be a
> problem until I get my hands on a trubo this winter.  TIA
> 
> Jody Bailey
> http://www.scirocco8v.com
> 
> 
> 
> 
> --
> Email LIST problems to: scirocco-l-probs@scirocco.org.
> To unsubscibe send "unsubscribe scirocco-l" in the
> message to majordomo@scirocco.org
> 


=====
Jason Adams
Fahrvergnugen Forever :) Oo=w=oO
84 rocco 16v
84 rocco turbo (project stage)
98 chevy Z71 (cause everyone needs a truck!)
...I'll try being nicer if you'll try being smarter...

__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org