[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Tech: Hot Start Pulse Relay or Lambda Realy - does anybody know more than the Bentley





The pulse injection relay is activated by the starter.



>
>Brian Wagner wrote:
> >
> > The 8v still has the hesitation, so I pull the HPR and the idle 
>immediatley
> > drops 300 rpm. Per the Bentley this relay is to pulse every 2 seconds 
>while
> > the starter is engaged ( this damn thing is staying on) I assume it is
> > feeding extra fuel if it continues to pulse. I haven't driven it yet 
>with
> > this disconnected to see if it still hesitates under a load, when I run 
>the
> > idle up in the garage it stumbles slightly and then takes off to 5800 
>rpm
> > (pops a little bit, loads up at 3200 rpm), any help on this would be
> > appreciated. TIA
> >
> > Brian
> > 88 16v
> > 86 8v (still kicking my ass)
> >
> > --
>
>Brian,
>
>Under what conditions does the relay get triggered? What 'feeds' the
>thing? Is it the part of (51?) that is only on when starter is used? Why
>then is it staying on, is it stuck (welded shut) or is the trigger still
>getting 12v?
>
>TBerk
>
>--
>Email LIST problems to: scirocco-l-probs@scirocco.org.
>To unsubscibe send "unsubscribe scirocco-l" in the message to 
>majordomo@scirocco.org
>


Chris DeLong
ICQ#45030867
Seattle, WA USA
'80 16V 'Rocco ragtop
'91 GLi 2.0 16V
'77 Rabbit 16V
'80 'Vert (parting out!)
'61 17 Window type II
'91 Vanagon
'77 Rabbit (for sale Cheap!)

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org