Re: Tech: Hot Start Pulse Relay or Lambda Realy - does anybody know more than the Bentley

[T Berk <tberk@mindspring.com>]

Brian Wagner wrote:
> 
> The 8v still has the hesitation, so I pull the HPR and the idle immediatley
> drops 300 rpm. Per the Bentley this relay is to pulse every 2 seconds while
> the starter is engaged ( this damn thing is staying on) I assume it is
> feeding extra fuel if it continues to pulse. I haven't driven it yet with
> this disconnected to see if it still hesitates under a load, when I run the
> idle up in the garage it stumbles slightly and then takes off to 5800 rpm
> (pops a little bit, loads up at 3200 rpm), any help on this would be
> appreciated. TIA
> 
> Brian
> 88 16v
> 86 8v (still kicking my ass)
> 
> --

Brian,

Under what conditions does the relay get triggered? What 'feeds' the
thing? Is it the part of (51?) that is only on when starter is used? Why
then is it staying on, is it stuck (welded shut) or is the trigger still
getting 12v?

TBerk

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org