Re: {OT} ABA into a A1 Cabby, the dirty details

[Night Shadow <soltwede@privateI.com>]

> yo eric.
> i think the motronic tach signal only works properly if you
> have the speed sensor connected. because when the second stage
> of the motronic kicked in on my car, my tach used to die. finally,
> i ran a seperate wire from the blue wire on the coil directly to the 
> old wire from the CIS-E harness. the one that used to go into the 
> distributor. i think it was black/red, but this is CIS-E.
> 
> check that out.
> 
> sucka.

Thanks man...cool thing is, since the Cabby is a 91, it has a speed sensor
buildt into the instrument cluster, I have hooked that lead into the
Motronic...so maybe this will work! :-)

--
Eric
Westminster, CO

76 Honda CB400F Super Sport
80 Scirocco (GF's Daily Driver)
81 Scirocco S (2.0 16v swap and complete restoration in progress)
84 Scirocco Automatic
88 Scirocco 16v (Parts car)
91 Cabriolet (2.0 8v swap and mechanical rebuild in progress)
00 Golf GL TDI (My Daily Driver)

"For Aquarians, the physics of loopholes is a perfectly valid science."
-Kelli Fox


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org