Re: audi 2.0 head

[VWMikeLVW@aol.com]

In a message dated 1/16/01 8:16:07 PM Pacific Standard Time, Cmr446@cs.com 
writes:


> In a message dated 1/15/01 1:44:20 AM Eastern Standard Time, 
> VWMikeLVW@aol.com writes:
>
> << 
>   the injectors are in the intake, it already has the larger throttle body, 
> and the intake is oriented correctly to fit in an A1.
>   >>
>
>    So someone even slightly creative and mechanically inclined could easily 
> run two sets of injectors? Four in the VW head, four in the Audi manifold, 
> increase the pressure at the fuel dist., rig up two lines from each point 
> on 
> the fuel distributor...


not exactly....I asked the same question a couple of years ago and found out 
that it just wouldn't work. Imagine the ports on a VW head extending up as 
far as the injector bosses and the manifold mating up around the entire 
thing. That is how the audi setup is.

Mike
http://www.geocities.com/vwmikel - trust me, a replacement is on the way!
'84-Arkay Turbo Rabbit GTI
'84-Rabbit GTI - future DCI drag car
'77-Rabbit - project
'80-Scirocco S - (um... to be:1.9L crossflow, turbo, 6 speed, widebody?)