[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Retrofitting a 02 sensor



TT sells something for that.
----- Original Message -----
From: "Marc Peterson" <mpeters6@rochester.rr.com>
To: <scirocco-l@scirocco.org>
Sent: Friday, December 14, 2001 10:35 AM
Subject: Retrofitting a 02 sensor


> I'm starting to gather parts for my JN block/JH head
conversion, and was
> wondering about the O2 sensor.  I'm going to be using my
existing CIS
> (non-lambda) and currently I have no way monitor a/f
ratio.  So, I want to
> install a O2 sensor that I can monitor with a meter and/or
guage.  What I
> was wondering is if I could drill and tap a hole in my
downpipe.  I was
> thinking about using the area near the bend at the bottom
where the 2->1
> transition is.  Do you think there is enough metal there
for the sensor to
> bite on, or do I need to get a nut welded on there?
>
> Thanks, Marc
>
>
> --
> Email LIST problems to: scirocco-l-probs@scirocco.org.
> To unsubscibe send "unsubscribe scirocco-l" in the message
to majordomo@scirocco.org
>
>

----------------------------------------------------
Sign Up for NetZero Platinum Today
Only $9.95 per month!
http://my.netzero.net/s/signup?r=platinum&refcd=PT97

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org