[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: got the 9a this AM



On Sun, 9 Dec 2001, Brett Van Sprewenburg wrote:

> Please see the Motronic conversion tech procedure on scirocco.org, as
> (most) all your questions will be answered.  The only piece that's missing
> (which I'll add shortly) is to use the Motronic fuel pressure regulator,
> but you'll have to build an adapter...details to to be posted soon.

As for the FPR, where is it located on the passat? i might have to go back
and get that :(

> Wrong.  Almost all CIS injectors are basically the same, except for
> the CIS-III units (Motronic and Digifart) which have different operating
> pressures and flow slightly more.  This topic _just_ went through the
> VW Auto-x forum.

Hmm, i was just reading on another site, that mercedes 190E cis injectors
flow more than others... will digifart injectors work for me, i probably
wont run into another passat & new injectors are pricey. I'm guessing the
stock flow rate is in the books, so i'll be okay there on figuring out if
I have any other options.

Worse comes to worse i'm sure I can find a set of motronic injectors. 
any tips since i'm not on the VW autox forum?

thanks for your help,

Steve

***************************************************************************
             Fashion Twins, activate! form of: a lemming.          
                      http://westfailure.org
*************************************************************************** 


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org