Quaife install help/tranny tear down.

[Gary Huff <scirocco86@home.com>]

How the hell do you get the 5th gear shift fork off that silly shaft? The tranny in question is a 16v AGB. The shaft it rides on appears to be threaded, and on a sidenote, the spring loaded shaft popped out and won't go back in all the way :) I assume once I get the rest of the tranny apart I can easily repair this? This doesn't seem that complicated, just really more of a black art than anything.The drive flanges are both off, and I have the 5th gear end cap sitting next to it. I've removed the pop in retainer with the 3 prongs, the circlip that goes underneath, and the three metal pins that drop in and hold the next circlip down in place. The next step seems to be to take 5th gear, and it's forks & synchro etc. off so that I can remove the rest of the housing. It seems that the 5th gear shift form is threaded onto the hollow shaft, how does this come apart!? am I retarded and did I miss something obvious?
	-ghuff

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org