Re: M6 vs. M8 bolt torque rear main seal..

[T Berk <tberk@mindspring.com>]

Brian McGarvey wrote:
> 
> Hello...
> Duh I dont kow the diff between an M6 and M8 bolt.
> So I cant torque down the bolts to reassemble the rest.
> 
> the bolts i'm talking about are on the rear of the block. and hold the
> large metal plate onto the block and the rear main seal.
> thanks
> 
> also any suggestions for the shade tree for holding the flywheel still
> during torqueing of the flywheel bolts?
> brian


Torque specs in Bentley.

Try a doubled up coat hanger, you use it to keep the crank from turning.
Works great for the pressure plate bolts too.

hth,
TBerk

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org