Re: Rotors Part II - Ordering

[thescirocco@juno.com]

On Tue, 7 Aug 2001 23:07:35 -0400 (EDT) L Crawford <vw_lcrawfo@yahoo.ca>
writes:
> Howdy Folks,
> 
> Well tomorrow morning I'll be placing the order for
> parts (vented rotors and the thinner pads + anti
> rattle clips).  Is there anything else inexpensive and
> fairly easy to do that I should be fixing or looking
> at while I'm doing this (please include if I'll need
> any 'special' tools - like a sledge hammer or extra
> long skinny fingers)?
> 
> The rotors are VERY rusty.  So I imagine anything
> everything else is just as rusty.
> 
> On the plus side I now know its an Early model 84' :-)
> 
> Thanks Folks!
> 
> Lee
> 84' 8v Silver Scirocco

An impact driver will help with removing the philips set screw, if they
are still there...

I prefer the later style flat anti-rattle clip, over the wire type... 

Peter - http://thescirocco.com - Techtonics Discount Dealer -  Bear,
Delaware 19701                                                           
                                                                   '79
Scirocco 16V "Retro"    
'83 GTI "Caged Rabbit"
'84.5 Scirocco "Oddball"
'84 GTI 
SciRollers: '79 White Champagne Edition, '84 Black, '88 Red

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org