problem solved

["doug c." <scirocco16v@europe.com>]

ok, so i drilled out the bolt to the cranshaft vibration damper and was able to get the thing off...but, i may have messed up the threaded part on the damper itself...

seeing how the inner pulley of the damper has 8 holes can i just use the 4 that didn't have screws into them the first time? i assume this will be fine, but let me know if it's not..

also, would the dealer be able to get me some of the 6mm hex screws or will have to mailorder them?

doug

PS...stay tuned for more qeustion from me as i'll be working on my car for the next two days doing a timing belt, and head gasket as well as a million other gaskets

THANKS!!!

______________________________________________
FREE Personalized Email at Mail.com
Sign up at http://www.mail.com/?sr=signup

--
Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org