16v project web site... and anyone with an 85> dash board?

["Julie Macfarlane" <juliemac@telenet.net>]

Dispite destroying my hands, arms, back and, yes, my nails, most of the
wiring is back in place...
I still have a lot to re-wire as some of it does not belong to the engine by
the looks...But it will get there.

I have found that the car has taken a greater hit than Dave mentioned. The
drivers door has quite a bit of bondo on it where the metal was pulled
out...

As part of the re-wire, does any one have a dash board that would fit this
wiring harness? Or should I re-design the dash (and get rid of the wood
grain)... As you can see on the web site that could be done..
There are two connectors on the inside that I have no idea where they go.
One seems marked HVAC.. Peter?

Sorry to have missed the meet in the great west ny....

www.telenet.net/~juliemac/rocco    Have a look...

Julie Macfarlane
'81 8v Scirocco (In restoration, but on road..)
'81 16v Scirocco (Fronkenstein)
'83 Rabid Jackalope GTi (Baby/ bad CV's)



--
Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org