[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Scirocco 16v Trans in MK1?



On Tue, 14 Nov 2000 04:26:31 GMT "Chris DeLong" <green536@hotmail.com>
writes:
> 
> Axles and hubs "might" need to be changed. 16V trannies have 100mm 
> driveflanges requiring larger axles. If you have a newer 8V 90mm 
> tranny you can swap the driveflanges and use the original axles.
Otherwise you 
> "might"  have to change hubs as the larger joints will not fit.

> >
> >No, that will bolt right up.
> >

D'oH! I forgot to mention that...

Hey Chris didn't you have procedure to make it fit? <g>

If you have access to the 100 mm axles and hub carriers, that would be
the best way to go.

Peter
'79 Scirocco 16V project car, 100 mm
'83 GTI "Caged Rabbit", 100 mm 
'84 Scirocco, RD/FF, 90 mm
'80, '88 Scirocco rollers

--
Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org