[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Comp Ratio & Head gasket thickness
>Does anyone out there know the TRUE compression ratio on the factory 2 liter
>16V motor? The "official" rating is 10:1 but I've heard that they tend to
>run a little higher than that (according to people that have CC'ed the head
>and measured the CR).
>
>Also, does anyone know the installed/compressed thickness of a 2 liter 16V
>headgasket? I need to know this number for calculating compression ratio
>with different gaskets and/or spacers.
>
>Thanks.
>
>-Bradley
I've seen several sources (including the glove box manual) refer to
the compression ratio as 10.8:1. This is for a 92 Passat.
==Brett
\/ '84 Scirocco (ITB racer 2B) | "Hot VW's, take two home. They're small"
\/\/ '88 Scirocco 16v (Show), '85 Scirocco (Winter) | - brett@netacc.net
--
Email problems to: scirocco-l-probs@scirocco.org To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org