Re: (Non Roc Sort of) A blinking problem

[Eric L Ellis <elf16v@juno.com>]

Replace the bulb with another 1157? BUT be sure to get one with a brass
base. I have had more problems with the nickle plated ones than I care to
say. The bulbs are made in such mass production, that it is always wise
to start there.

Eric Ellis
Good, bad....I'm the guy with the gun!


On Mon, 27 Mar 2000 20:47:07 -0800 "Dave Ewing" <rabbit16v@prodigy.net>
writes:
> Hey all!
> 
> I have a strange turn signal problem.  I recently put the front euro 
> turn
> signals on my Rabbit with euro bumpers (this Rabbit is basically a 
> Scirocco
> 16v in disguise--has entire harness including computers, etc).  
> Since I have
> made the change, the left front turn signal blinks twice as fast as 
> the
> right.  front and rear lights work (seems like it would be a bulb), 
> checked
> the flasher, even swapped the turn signal switch.  And, yes, I 
> checked the
> grounds.  I even swapped the two wires around on the turn signal.  
> These are
> ONLY turn signals, not marker lights.  Any help would be appreciated 
> and
> TIA!!
> 
> Dave
> 
> 
> --
> Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
> "unsubscribe scirocco-l" in the message to majordomo@scirocco.org
> 



--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org