[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: bubble in cooling system






> can someone tell me how to bridge the radiator switch so that the fan will
> remain on?..

****I don't know if the thermo switch is different for the Mk2's, but mine
went out on my Mk1 and I conveniently had a toggle attached to a twisted pair
cable that ran near my batt. I just connected the two wires from the thermo
switch to the toggle and turned the fan on when the coolant got warm and left
it on while I drove, this worked till I had time to run to the parts store.
Theoretically it should be the same for your car, Just jump the wires that go
to the thermo switch and this should turn your fan on indefinately, that is
untill you dissconnect them.

HTH
Nathan


--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org