Re: [tech] Dash lights...

["Andy Holmes" <scalainj@hotmail.com>]

Take out the surround for the cluster, remove the screw on the cluster and 
tilt it forward. You may be able to get your fingers in the the bulb holder. 
Twist and remove.

However more than likely you will have to pull the speedp cable off the back 
to get access or if your real unlucky like mine disconnect the MFA vacuum 
tube and the 2 plug connectors form the bottom and take the whole thing out 
through dash.

Its a pain to be honest

Andy


>From: "rexford booth, iii" <rboot8i7@mwc.edu>
>To: <scirocco-l@scirocco.org>
>Subject: [tech] Dash lights...
>Date: Thu, 21 Dec 2000 09:29:56 -0500
>
>How do I replace the lights that illuminate the gauges on an 88 16v?  The 
>one over the speedometer went out and the one over the RPMs dimmed 
>significantly.  I was able to (somehow - I don't know how exactly) get the 
>one of the RPMs to get back to it's normal brightness, but the Speedometer 
>light remains dead.  How do I get access to the lights?
>
>Thanks in advance,
>
>Rusty
>88 16v
>
>--
>Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
>"unsubscribe scirocco-l" in the message to majordomo@scirocco.org
>

_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.


--
Email LIST problems to: scirocco-l-probs@scirocco.org. To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org