Re: engine dies around corners

["Dave Ewing" <rabbit16v@prodigy.net>]

All these are very possible reasons for dieing around corners on a low tank.
BUT, the MOST likely (if you have a transfer/in-tank pump), your in-tank
pump is dead (in some way, bad pump, wiring, etc).  IF you DON'T have an
in-tank pump, this is a NORMAL thing since the earlier tanks didn't have
much for baffling.  Now if you have an in tank pump, GO fix it!  If not,
fill it atleast half full before you take sharp curves!!  (although my
Rabbit does this above half tank also, of course I am taking a 270deg on/off
ramp at 60 or 70 on three wheels!!)


--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org