Electric power cuts... Fixed!

[Joel Leclerc <deejay@info.polymtl.ca>]

Well the problem was not the big wire connected to the batt +, but the 
other end screw that hold the little wires attached to that connector that 
was not screwed enough, was barely visible but when the engine was pulling 
on the wire it may unconnected it for a sec and this cuts the electric 
power...

Everything seem fine now since the screw is tied now.

thanks for helping,

Joel


--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org