[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re:
If it is a Scirocco 2, you have to rotate the wires on the headlight
connector, if the lights didn't come with adapters.
If I remember correctly, I used a small screwdriver and released each
spade terminal from the connector. Looking at the connector from the
headlight side; just rotate each wire once clockwise.
That should work, otherwise just figure out the pin out of the H4 bulb.
Peter
On Sat, 25 Sep 1999 21:39:46 -0400 Vi0lat0r <vi0lat0r@redconnect.net>
writes:
> Hey guys!!
> I got some euro lights from a friend of mine today. I hooked them up
> and
> they don't work right. when the brights are on the low beam is on
> but its
> very low like the is a bad ground. is there some thing i'm doing
> wrong? Is
> there a relay or something that i need??? \
>
>
>
>
> Bill
>
>
> --
> Email problems to: scirocco-l-probs@scirocco.org To unsubscibe send
> "unsubscribe scirocco-l" in the message to majordomo@scirocco.org
>
--
Email problems to: scirocco-l-probs@scirocco.org To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org