[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Torque steer from hell




Ewwww...then you definately bent the frame or cracked some welds if you
did that much damage to a control arm....

Eric


On Thu, 9 Sep 1999, Smith, Mike wrote:

> Hi Eric,
> 
> The original control arm (wishbone) was folded nearly in half! It's had two
> new ones since to try and fix it, to no avail.
> Thanks anyway :-)
> 
> Mike
> 
> 
> >Sounds like you bent a control arm, put a new one in on that side and see
> >if the problem goes away
> >
> >Eric
> 
> 
> *****
> *****
> *********************************************************************
> This email and any files transmitted with it are confidential and 
> intended solely for the use of the individual or entity to whom they   
> are addressed. Please note that ICM is able to, and reserves the right to,
> monitor e-mail communications passing through its network.
> 
> If you have received this email in error please notify our mail
> manager at mailman@icm-computer.co.uk
> 
> This footnote also confirms that this email message has been swept by 
> MIMEsweeper for the presence of computer viruses.
> 
> Ver 1.1 1999 ICM Computer Group plc
> *********************************************************************
> 
> --
> Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
> "unsubscribe scirocco-l" in the message to majordomo@scirocco.org
> 


--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org