RE: Clutch Q's

["Chris DeLong" <green536@hotmail.com>]

<x-flowed>Yes all watercooled VW's exept Vanagon cv boot repair kits(german) for the 
inner joints come with 12pt bolts.


>From: "Aaron Ness" <aaron@makuta.com>
>Reply-To: <aaron@makuta.com>
>To: "'Chris DeLong'" <green536@hotmail.com>,        "'scirocco'" 
><scirocco-l@scirocco.org>
>Subject: RE: Clutch Q's
>Date: Wed, 13 Oct 1999 16:12:35 -0500
>
>Did VW use 12pt. SHCS to hold the CV joints in?  My Bug has them, but my
>brother's '85 GTI takes a 6mm allen wrench.  I believe we were the first to
>pull that transmission too, and I think the boots are original, so I think
>those are also the original bolts.  Haven't looked at those particular 
>bolts
>on my 'rocco yet; I just assumed they would be the same as his Golf.
>
>-----Original Message-----
>From: owner-scirocco-l@scirocco.org
>[mailto:owner-scirocco-l@scirocco.org]On Behalf Of Chris DeLong
>Sent: Wednesday, October 13, 1999 3:11 PM
>To: thescirocco@juno.com; scirocco-l@scirocco.org
>Subject: Re: Clutch Q's
>
>
>Ok i think there might be some misunderstsanding about what we are talking
>about here. My posts were in reference to the cv joint bolts. Theother guy 
>i
>think his name is Gary he might have been talking about the flywheel bolts.
>If this si the case then i agree with the below and still maintain the
>statement that the cv bolts are 8mm written on the socket but the actual
>size of the "allen" is a 6mm 12pt. Hope this clarifies things
>
>
> >From: thescirocco@juno.com
> >To: scirocco-l@scirocco.org
> >Subject: Clutch Q's
> >Date: Wed, 13 Oct 1999 14:16:21 -0400
> >
> >
> >
> >On Wed, 13 Oct 1999 10:19:05 -0600 Mail Delivery System s: 0
> > >
> > > I couldn't remember the 190mm flywheel bolt size, but I knew they
> > > were at
> > > least 10mm. I just went out to my garage and checked it, it is 11mm
> > > and
> > > it is hex.
> > >
> > > The 210mm flywheels are 9mm and 12 pointed, I remeber that, because
> > > all I
> > > had were 6 pointed sockets and I had to drive to Sears in the middle
> > > f
> > > the job.
> > >
> > > Peter
> > >
> > > On Wed, 13 Oct 1999 07:55:38 -0700 "Mark Madison"
> > > <mmadison@aracnet.com>
> > > writes:
> > > > I'm voting for the 8mm.  I removed the tranny in my 84 GTI and it
> > > > used this
> > > > socket... I also found that in older cars... my 78 Scirocco it had
> > > a
> > > > hex..
> > > > not
> > > > 12pt and I believe it was a 6mm.
> > > >
> > > > mark
> > > >
> > > >
> > > > --
> > > > Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe
> > > send
> > > > "unsubscribe scirocco-l" in the message to majordomo@scirocco.org
> > > >
> >
> >--
> >Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
> >"unsubscribe scirocco-l" in the message to majordomo@scirocco.org
> >
>
>
>Chris DeLong
>ICQ#45030867
>'80 16V Rag
>'65 Bus (ugly, but good for campin' W/toaster oven)
>'82 GLI
>'80 'Vert
>'61 17 Window
>'78 Scirocco
>
>
>______________________________________________________
>Get Your Private, Free Email at http://www.hotmail.com
>
>--
>Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
>"unsubscribe scirocco-l" in the message to majordomo@scirocco.org
>


Chris DeLong
ICQ#45030867
'80 16V Rag
'65 Bus (ugly, but good for campin' W/toaster oven)
'82 GLI
'80 'Vert
'61 17 Window
'78 Scirocco


______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com

--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org


</x-flowed>