[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: #*%$@! Axle Nut!!!!!



<x-charset iso-8859-1>I always do this by just putting the socket on the wrench with no extension,
then, with the car on the ground, take the handle off my floor jack and put
the big end over the wrench..........this provides a nice 3.5ft breaker bar
that I can either pull up really hard or stand on to break the nut loose.

HTH

Brian H
'78 Ragtop currently with no nuts.....or guts or brains
> -----Original Message-----
> From: owner-scirocco-l@scirocco.org
> [mailto:owner-scirocco-l@scirocco.org]On Behalf Of WaspHwy@aol.com
> Sent: Saturday, November 27, 1999 7:59 PM
> To: scirocco-l@scirocco.org
> Subject: Re: #*%$@! Axle Nut!!!!!
>
>
> yes, that is what bent my breaker bar. I tried the blow torch,
> and it didnt
> do anything
>
> --
> Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
> "unsubscribe scirocco-l" in the message to majordomo@scirocco.org
>


--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org


</x-charset>