RE: Water Temp Sensor(Instrument Cluster Gauge)

["Brian Honnold" <bhonnold@pac-cap.com>]

<x-charset iso-8859-1>It's on the drivers side of the head, on the firewall side of the outlet
flange where the heater hose is connected.

BcH

> -----Original Message-----
> From: owner-scirocco-l@scirocco.org
> [mailto:owner-scirocco-l@scirocco.org]On Behalf Of max@rieger.dynip.com
> Sent: Monday, November 15, 1999 3:53 PM
> To: Oen, Shawn
> Cc: scirocco list
> Subject: RE: Water Temp Sensor(Instrument Cluster Gauge)
>
>
> Whoops!  Also forget to say, it's an '87 16V (Scirocco of course!)
>
> On Mon, 15 Nov 1999, Oen, Shawn wrote:
>
> > it is on the coolant flange on the front of the head between
> plug #2 and #3.
> > it is a plastic flange and the sensor is held on by a clip.
> Make sure and
> > change the o-ring also.
> >
>
>
> --
> Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
> "unsubscribe scirocco-l" in the message to majordomo@scirocco.org
>


--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org


</x-charset>