Re: sad, sad day....

["Alex Ting" <alex@millenniumsolutions.net>]

>Ahahahahahahaha

i hope you choke and die.

>
>Bet ya didn't take the intake manifold off like Someone suggested?????

ok wise guy, that wouldn't have made any difference at
all.  It would have made the job twice as long and twice
as difficult.


>remember the warning about the clips
>hahahahahaha

i knew all about it before hand, but it was either that or order
the spreader and wait for a few days.

>Sorry, having to much fun driving my new passat around and gleefully
>wrenching on the roc

well that's all good for you, maybe you can come over and wrench
that 16v motor right out of my garage, eh?


Alex Ting
(still a little ticked off and leaking exhaust fumes)

Account Manager
Millennium Solutions Group, Inc.
575 Menlo Dr. #4
Rocklin, CA  95765

Phone:  888.801.2001 ext. 228 or 916.630.2001
Fax:  916.630.2000
Email: alex@millenniumsolutions.net
-----Original Message-----
From: Brian Honnold <bhonnold@pac-cap.com>
To: Alex Ting <alex@millenniumsolutions.net>; scirocco-l@scirocco.org
<scirocco-l@scirocco.org>
Date: Sunday, March 28, 1999 6:38 PM
Subject: Re: sad, sad day....


>Ahahahahahahaha
>
>Bet ya didn't take the intake manifold off like Someone suggested?????
>
>remember the warning about the clips
>hahahahahaha
>
>Sorry, having to much fun driving my new passat around and gleefully
>wrenching on the roc
>Brian
>-----Original Message-----
>From: Alex Ting <alex@millenniumsolutions.net>
>To: scirocco-l@scirocco.org <scirocco-l@scirocco.org>
>Date: Sunday, March 28, 1999 5:41 PM
>Subject: sad, sad day....
>
>
>>
>>argh.
>>
>>so, after all this talk about stripping nuts and
>>breaking studs on the exhaust manifold, I decided
>>to go and do both this weekend.
>>I was in the process of putting my headers on and
>>had nearly everything finished, when I rounded off
>>one nut and broke a stud torquing the headers down.
>>It looks like the stud broke with a little bit sticking out
>>where the header flange is, so I may be able to vise
>>grip it out if I take the headers off again.
>>My question for those of you who have done this before
>>(you know who you are), is whether I should just take this to a
>>shop and have them do this, and whether I should replace
>>all the studs while I'm at it.
>>
>>btw, I don't recommend taking the downpipe spring clamps
>>off with a screwdriver (they almost killed me when they
>>came flying off).
>>
>>Alex Ting
>>(who's rocco now sounds like a popcorn maker on
>>wheels due to a very big exhaust leak)
>>
>>Account Manager
>>Millennium Solutions Group, Inc.
>>575 Menlo Dr. #4
>>Rocklin, CA 95765
>>
>>Phone:  888-801-2001 ext. 228 or 916-630-2001
>>Fax:  916-630-2000
>>Email:  alex@millenniumsolutions.net
>>
>>
>>
>>--
>>To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
>>If you experience other problems, email: scirocco-l-probs@scirocco.org
>>
>


--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org