[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: PLEASE..HELP..Really
You could try an e-z-out, since the center is already hollow. Or
you MIGHT be able to use a small punch and hammer and either
try to rotate the bleeder or if not, collapse it inside the threads and
take it out a piece at a time.
Date sent: Sun, 20 Jun 1999 15:59:57 -0700 (PDT)
From: Michael Leach <scirocco16v_1@yahoo.com>
Subject: PLEASE..HELP..Really
To: scirocco-l@scirocco.org
> the short version:
> Bleeding my brakes today after reinstalling and could not get front
> bleeder screws to loosen... attempted to use torch and managed to snap
> one of them off at the base of the caliper and the other one is getting
> pretty stripped...how can I get them off....I need ideas quick
> is there some kind of thingy you can buy to pull out the snapped off
> one
> thanks
>
> ===
> Michael Leach
> 87 16v
> Rochester,NY
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
>
>
> --
> To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
> If you experience other problems, email: scirocco-l-probs@scirocco.org
>
>
-----------------------------------------------------
Kris Rayner
1984 VW Scirocco
1981 VW Scirocco S - Soon to be a 16V :)-
"I do nothing in moderation but work."
-Charles Dickens
http://www.fix.net/~trzracing/web/scirocco.htm
--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org