Re: [tech] water pump pulley replacement 16V??

["Gerry Reichelt" <reichelt@telepath.com>]

----- Original Message -----
From: Mark Peele <map@scirocco.zzn.com>
Subject: Fwd: [tech] water pump pulley replacement 16V??
> the allen heads are 6mm allen.
> the trick is to hold the pulleys in place to get leverage. I usually use
vice grips - but you must be carefull not to > bend the pulleys . . .

    I've had pretty good luck loosening the bolts first while the belt is
still under tension. You can also use an old belt and a pair of vise grips
to grab the pulley. I think Autotech even has a specific tool for this ($$$)
    Gerry


--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org