Re: what a SHITTY day for my 87..

["Chris DeLong" <green536@hotmail.com>]

you can use 4 door seats you just have to install the cables and lever for 
the release. I have known people (myself) to install 2 door seats and flip 
them forward with the 2 clips at the bottom of the seat back. It saves 
stereo equip. when some fucker that has no knowledge about VW's tries to get 
something. Just my 2 cents


From: Kathy Teulie <104372.1061@compuserve.com>
>To: "Ian Overholt" <ioverholt@hotmail.com>, scirocco-l@scirocco.org,        
>dyliu@pacbell.net
>Subject: Re: what a SHITTY day for my 87..
>Date: Fri, 30 Jul 1999 12:01:40 -0400
>
>My friend Frank broke his seat frame like you did. You can use
>several upper frames to replace yours. Jetta GLI 2 door  A1 and A2's will
>fit.
>If you can, get a Scirocco seat back.  You can even use a passenger seat
>back but all the controls will be on the other side.   I've replaced upper
>and
>lower seat fabric before. It is best not to try to replace the upper seat
>back
>fabric if you are new to this stuff. Just get a good frame with matching
>fabric.
>The lower frame is Scirocco only! Do not try to put a Golf or Jetta lower
>seat
>frame in your Scirocco. You would need to be about 3 feet tall to
>drive your car with out hitting your head on the roof  :  O.
>Doug
>
>Message text written by "Ian Overholt"
> >
>That's some bad news.  Replacing the door isn't that bad, but if the dent
>looks easy to straighten, it could be worth fixing.  I just bought a '78
>with a good dent in the driver's door and I'm going to replace the door.
>
>On the seat issue, is the break in the upper or lower part of the seat?
>The
>lower part is much easier to replace.  If your fabric is worn out on the
>lower part, now is the time to change it.  All the lower seat foam and
>fabric are the same on the driver and passenger seat, so all you have to do
>
>is find a junkyard car with a decent passenger seat (much easier than
>finding an intact driver's seat).  Then get a driver's seat (fabric/foam
>condition doesn't matter) and put the passenger seat fabric and foam on the
>
>new driver's seat frame. Does this make sense?  I've replaced upper and
>lower seat fabric before.  The upper is much harder because there are a lot
>
>more places where the fabric is attached to the frame and there are pieces
>going back and forth and around things and popping out the plastic pieces
>where the headrests mount is REALLY hard.
>
>You're in the bay area, right?  Come to the meet on Saturday.  I'll show
>you
>what I'm talking about.  :)
>
>Ian Overholt
>'88 16v
>'78 Pre-S S<
>
>
>--
>To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
>If you experience other problems, email: scirocco-l-probs@scirocco.org
>


Chris DeLong
ICQ#45030867
'80 16V Rag
'65 Bus (ugly, but good for campin' W/toaster oven)
'82 GLI
'80 'Vert
'80 PU (slammed to the curb)
'61 17 Window




_______________________________________________________________
Get Free Email and Do More On The Web. Visit http://www.msn.com

--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org