Re: water pump probs

["Gerry Reichelt" <greichelt@mmcable.com>]

    I had the same problem on my '87, I shimmed the pulley out with flat
washers and longer bolts. Seemed to have been happening prior to my new pump
install also.
    Gerry
Subject: water pump probs


> has anybody else had this problem:
> my water pump pulley is coming in contact with my crank pulley.  Those two
> pulleys are just too damn close together.  I dont see how they can move
> anyway.  They are both mounted solidly.  And no, it's not my water pump
> bearing that's out, i just replaced the pump because it was worn out, but
> the pulleys still are rubbing on each other.  Has anyone else had this
> problem or is it just normal for the pulleys to be so close.
> thanks
>
> Eric Person
> 86.5 16v
>
>
>
> --
> To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
> If you experience other problems, email: scirocco-l-probs@scirocco.org
>


--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org