Re: Washer Nozzles

[Gerry Reichelt <reichelt@zoom1.telepath.com>]

At 12:23 PM 1/18/99 -0500, Christopher Grossi wrote:
 I have an 85 8v and I am
>having trouble with the windshield washer nozzles. The pump works great,
>but the hoses need to be connected to the nozzles in the hood. Someone was
saying you can get these out of the hood, but
>I don't see how since they are clipped in tight. Is there a recommended
>method for this without scratching up the paint on the hood? 
    The plastic clips can be squeezed together with a pair of needlenose
pliers, very easy. The hardest part is getting the old hardened hose off
first. Use a razor knife. The nozzle then just swings up out of the hole.
New ones are fairly cheap, even at the dealer.
   Gerry

--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org