Re: front mono wiper

["Owen" <rabeys@cadvision.com>]

Sure, just get the linkage full wiper linkage off any 82 or 83 scirocco. 
Then all you need to do is remove the old linkage and install the new one. 
i think it bolts in with the exception of one hole that does not match up,
but is not needed, but i may be wrong.  Also, a mk1 linkage will work too,
i think the later model mk1 roccos came with the single wiper, but this
needs a little more modification to fit.  Also, the mk1 wiper arm will not
fit, so its best to find a mk2.  And if you want the straight arm, you can
either bend yours straight, or buy one from Mono Style for 12 pounds.  I
can get you the phone # if you need it.  
	As for parking it straight, it is pretty easy to understand when you
actually see the linkage, but not as easy to explain.  Its just a matter of
getting the linkage bolted down to the motor in the correct position, and
you may also have to move arm itself over a notch or two.  

	HTH,

Owen
87 16v
http://www.geocities.com/MotorCity/Garage/1571

> sorry chaps,,
> i have deleted the previous replies to the list about the front mono
wipers
> i would be graeful if someone could suggest again the models etc i can
steal
> parts from.... i would also like to know how to park the wiper in the
centre
> position
> hope some one out there can help,,............
> cheers guys keep Roccing................
> 
> Lindsay (scooby) Campbell
> lcampbell@zetnet.co.uk
> http://www.users.zetnet.co.uk/scooby/
> 92' Scala 1.8i
> icq - 10529859
> 
> 
> 
> --
> To subscribe or unsubscribe, send email to
scirocco-L-request@scirocco.org,
> with your request (subscribe, unsubscribe) in the BODY of the message.

--
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.