Re: Upper strut stress bar.?????????

["Ryan Schuermann" <rts@nol.net>]

is this because of hood clearence??, you know you can take the 16v 
bar, flip it around 180degrees and it lines right up since the strut 
bolts are parallel, and it clears the throttle body, if mine actually 
still was able to line up id test it but it looked to me that the 16v 
tie bar, flipped around lined up and cleared the engine just fine!
course i dont have an overflow bottle either but i think that sits 
lower than the bar, so whats the deal does a flipped around 16v 
stress bar hit the hood...dejavou did i already post somethign just 
liek this a few months back..this is freaky..

Ryan

> Right. The 16v bar sits backwards compared to the way the 8V bar mounts.
> I like the way the 16v bar is mounted byself, the bar is up against the
> firewall and out of the way of -everything-. Both bars are not
> interchangable between each other either or I would of had the 16v bar on
> my Roc long before now! :)
> 
> 
>               Shawn Meze
> 86' Jetta GLi           82' Scirocco GTi
> The Fastest, Quickest, Cleanest and
> best looking Scirocco in all of San Diego!
> http://www.Geocities.com/MotorCity/Speedway/1308/index.htm
> 
> ___________________________________________________________________
> You don't need to buy Internet access to use free Internet e-mail.
> Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
> or call Juno at (800) 654-JUNO [654-5866]
> 
> --
> To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
> If you experience other problems, email: scirocco-l-probs@scirocco.org
> 
> 
> 

--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org