[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: more information



Most likely what has happened is the piston in the fuel distribution block
has corroded to the shaft it rests in.  You should be able to simply take
the block off of the old air sensor housing and put it on the new housing.

Aaron
'79 Scirocco S- Still FOR SALE (in Dallas, TX)
'93 Corrado SLC

----- Original Message -----
From: Ryan Schuermann <rts@nol.net>
To: <scirocco-l@scirocco.org>
Sent: Tuesday, February 02, 1999 9:07 AM
Subject: more information


>ok the fuel dis im using is out of a cis-lambda, i remember vaguely
>having to replace the lambda sensor on that rocco, anyways it has
>been sitting in my garage for about 2 years, it is injecting gasoline
>in all 4cyl plus cold start, not much but a trace. I got a tablespoon
>out of the 5th injector after cranking 5 times. the plate moves
>freely, everything was working prior to the swap, i have replaced the
>ciol with a better one (new plug wire style and also updated the cap
>and installed a new rotor.
>
>my main problem here is the fuel being injected, its not suppose to
>be, someone suggested my o-rings in the dist prob dried up and are
>lettign the gasoline past, which is prob right, which really sucks.
>so i guess its back to the teeny air flow plate. bah a whole day
>wasted. i guess a 16v distributor wouldnt work would it? it looks
>quite different. can this 8v large air plate fuel distributor be
>repaired?
>
>thanks for all your help guys
>
>Ryan
>
>--
>To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
>If you experience other problems, email: scirocco-l-probs@scirocco.org
>
>


--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org