[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Source for Pistons/and some ?s



i think i have a set instock for around 550 or so , if you wan tforged
aluminum we dothem with rings and cotaing for 750 no coating 600
jonas

eric chase person wrote:
> 
> yep, you'll need to bore the block oversized.  No conflicts with rods or
> crank, though.  Shouldnt be a problem with the head gasket either.  You
> will need to buy the corresponding oversized rings, but thats probably
> obvious.
> 
> I'm also looking for a 2.0 shortblock myself for this summer when i
> replace the clutch but
> i was thinking of keeping the standard pistons.  I couldnt really find a
> good deal on oversized 2.0 pistons. what price can Potterman get on them?
> because if its less than than the $600 for forged JE's i might actually
> consider doing the oversized thing too.
> 
> Eric Person
> 86.5 16v
> 
> On Wed, 29 Dec 1999 Testastrega@aol.com wrote:
> 
> > If you go to oversized pistons on a 2.0 16V will that require any machining
> > to the block? Such as a over-bore. How about conflicts with the rods and
> > crank?
> >
> >
> >
> > Shannon
> > "Better to burn out than to fade away"
> > 87 16V w/210,000 mi.
> >
> > --
> > Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
> > "unsubscribe scirocco-l" in the message to majordomo@scirocco.org
> >
> 
> --
> Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
> "unsubscribe scirocco-l" in the message to majordomo@scirocco.org

--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org