Re: [16v] Ford/Bosch O2 sensor

[Brad Sheridan <brads@mindspring.com>]

At 06:33 PM 4/9/99 -0400, you wrote:
>Gang,
>	
>	Well, my car just crossed the 60k mark, and I figured it's about time to
>do my 02 sensor.  Not that anything's wrong per se, but I am one to
>maintain the car properly... why wait until the car is running so rich that
>you wind up having more carbon deposits than displacement for air and
fuel? :)
>
>	So, I called up our trusty Mark at Adirondack and got meeself a Bosch O2
>sensor for like $45... it's the Ford one without the connector already on it.
>
>	Yeah, I suck at soldering, but I figured for the $70 I will save, I'd
>gladly burn a few layers of skin off trying to get the wires to stick
>together.
>
>	I yanked the 02 sensor out of the box, and it's got a black wire and two
>white ones.

Black= signal,
White= heater wires. 

Put the black wire to the wire that has a separate spade type connector, and
the two white ones to the two wire connector for the O2 sensor heater(it
doesn't matter which goes to which in this connector). 

Brad


--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org