Re: Hydro vs. Solid

[Shawn C Meze <skerocdriver@juno.com>]

On Sun, 04 Apr 1999 09:42:48 -0700 Bill Cawley <bcawley@nwrain.com>
writes:
>I don't have the numbers either and checking a lifter will certainly
tell you
>for sure, but all you should need to do is glance under the valve cover.
 If
>you have 5 caps holding the cam down then it is solid, if their are only
4
>caps holding the cam down then it is hydro.  I am fairly sure this is an
>accurate test, if anyone knows different please speak up.
>
>Bill Cawley


YES!! Thats right! I was in a hurry to reply and get to work I forgot!
>From left to right the #4 cam bearing is not used (Missing.) on the hyd
head. Good call Bill!


              Shawn Meze
86' Jetta GLi           82' Scirocco GTi
The Fastest, Quickest, Cleanest and
best looking Scirocco in all of San Diego!
http://www.Geocities.com/MotorCity/Speedway/1308/index.htm

___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]

--
To unsubscribe, send "unsubscribe scirocco-l" to majordomo@scirocco.org.
If you experience other problems, email: scirocco-l-probs@scirocco.org