Re: Gear Linkages

[scirocco.gtx@juno.com (Mark A Peele)]

Yes.

I have an FN destined for Kristen's '78 - I have the linkage that goes
with is as well.

I am 99% sure you'll need the linkage.

Mark . . .
Scirocco 1982, Golf GT 1987
Scirocco 1978 (Kristen's)
Previous Sciroccos: 1981S (RIP), 1980S, 1975TS, 1975
~Working~for~nothing~
- --------- Begin forwarded message ----------
From: "ICQ#605234" <maweiler@redrose.net>
To: "Salvatore Guzzo" <yu129742@yorku.ca>,
<scirocco-l@scirocco.org>,"Paul Hanley" <credere@worldnet.att.net>
Subject: Re: Gear Linkages
Date: Tue, 8 Sep 1998 09:04:43 -0400
Message-ID: <000601bddb29$40c77f00$690910ac@mwweiler-desk.armstrong.com>

Ok guys on this same thread...if I was to change a 4 speed out for a 5
speed
is there any linkage change to be made.
- -----Original Message-----
From: Paul Hanley <credere@worldnet.att.net>
To: Salvatore Guzzo <yu129742@yorku.ca>; scirocco-l@scirocco.org
<scirocco-l@scirocco.org>
Date: Monday, September 07, 1998 9:39 PM
Subject: Re: Gear Linkages


>Hmm, and you replaced the circlip above the spring? It's has been a
while
>since I did mine, but there is a small circlip that retains the spring.
I
>am just not sure if that holds the shift rod from falling through the
shift
>bearing.
>
>You will probably need to adjust the linkage or at least fiddle with the
>bearing to get it shifting smoothly again as well.
>
>Good luck,
>Paul Hanley
>>The next day I looked at it and forced the lever ball to stay in place
- --
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.

------------------------------