[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: big bumpers?
well, on the first one, it is a euro bumper up top,
but what is the bottom piece? It sorta looks like
a butchered big bumper.
And yes, they both look SWEET.
Millennium Solutions Group, Inc.
8303 Sierra College Blvd., Suite 150
Granite Bay, CA 95746
Phone: 888-801-2001 or 916-797-9998
> From: Brandon Dove <email@example.com>
> To: Alex Ting <firstname.lastname@example.org>
> Cc: XXSpArCoXx@aol.com; email@example.com
> Subject: Re: big bumpers?
> Date: Friday, September 04, 1998 10:58 AM
> Well the first one just look like the standard black euro bumper for a
> with a (really nice) body kit. The second pic however looks like a big
> for sure -- it too is pretty sweet!
> -Brandon Dove
> 89 8v Scirocco
> Alex Ting wrote:
> > Hey Danny,
> > When you say heat and mold, what exactly do you mean?
> > Is the front end wider on the golf/jetta?
> > Does this mean you have to mold inwards?
> > What are you heating it with?
> > also, check out these sites and tell me what you think:
> > http://www.algonet.se/~jojje_b/sc8.html
> > http://www.algonet.se/~jojje_b/sc9.html
> > can't tell if these are actually VW big bumpers.
> > Thanks...
> > Alex Ting
> > Millennium Solutions Group, Inc.
> > 8303 Sierra College Blvd., Suite 150
> > Granite Bay, CA 95746
> > Phone: 888-801-2001 or 916-797-9998
> > Fax: 916-797-9997
> > Email: firstname.lastname@example.org
> > ----------
> > > From: XXSpArCoXx@aol.com
> > > To: email@example.com; firstname.lastname@example.org
> > > Subject: Re: big bumpers?
> > > Date: Friday, September 04, 1998 10:12 AM
> > >
> > > In a message dated 9/4/98 11:43:24 AM Eastern Daylight Time,
> > > email@example.com writes:
> > >
> > > << Anybody done this?
> > > Any suggestions/opinions?
> > > Is a Jetta or Golf bumper better?
> > > >>
> > > Its not that hard to do it just takes time to fit the bumpers right.
To subscribe or unsubscribe, send email to scirocco-Lfirstname.lastname@example.org,
with your request (subscribe, unsubscribe) in the BODY of the message.