Re: Autotech Swaybar

["Aaron D. Patton" <apatton1@airmail.net>]

There are two different full subframe connectors available for the A1 that I
am aware of.  Autotech sells one, which can be seen at
http://www.autotech.com/stresbar.htm.  The other is Euro Sport Accessories,
and can be seen at http://www.eurosportacc.com/vw/vw-html/vw-tiebars.html.
The Autotech bar is more expensive, but I trust Autotech and have no
experience with Euro Sport Acc.
HTH,
Aaron

- -----Original Message-----
From: Wm. Josiah Erikson <josiah@gsinet.net>
To: Scirocco List <scirocco-l@scirocco.org>
Date: Wednesday, September 02, 1998 8:20 PM
Subject: Re: Autotech Swaybar


>Subframe for an A1? What? Tell me more....
>    -Josiah
>    '83 Scirocco (for parts)
>    '84 GTi (needs fuel pump)
>    '86 Scirocco 8v (broken frame)
>    '87 QSW (daily driver)
>    http://www.gsinet.net/~josiah
>
>dalewitt wrote:
>
>> addition of the complete subframe should eliminate any breaking of
clamps.  I added the
>> subframe to eliminate this very problem
>>
>> ----------
>> > Which brackets are breaking?  I'm about to put on the 22mm front, 25mm
rear
>> > and the lower subframe.  I don't have the front mounts yet though so if
>> > those are the ones that break what is the solution.?
>> >
>> > Brian Honnold
>> > '78 Rocco Ragtop
>> >
>> > On Wednesday, September 02, 1998 5:32 AM, Brett VanSprewenburg
>> > [SMTP:brett@kodak.com] wrote:
>> > >
>> > > >
>>
>> > > > Anyone have one of these? I looking at getting a 22mm for my 87
16V. I
>> > remember
>> > > > some time back a thread was going around about them breaking
brackets.
>> > If so
>> > > > how was this resolved? Thanks guys!
>> > > >
>> > > > Thank You for Your Time, and soon to kicking ass in ES!
>> > > >         Shannon Fenton
>> > > >             Ext. 2712
>> > >
>> > > Yes, I've got the Autotech bars on my car, 22mm front, 25mm back.
I've
>> > > broken 3 brackets so far, 2 stock and one of the HD SS Autotech
brackets.
>>
>> > > I would suggest getting some of those _really_ heavy duty units
machined
>> > > from solid blocks of metal.  I think VL Enterprises makes/has this,
check
>> > > their web pages (probably a link on scirocco.org).  I'll be buying
them
>> > > myself at some point.
>> > >
>> > > ==Brett
>> > > --
>> > > To subscribe or unsubscribe, send email to
>> > scirocco-L-request@scirocco.org,
>> > > with your request (subscribe, unsubscribe) in the BODY of the message
>> --
>> To subscribe or unsubscribe, send email to
scirocco-L-request@scirocco.org,
>> with your request (subscribe, unsubscribe) in the BODY of the message.
>
>
>
>--
>To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
>with your request (subscribe, unsubscribe) in the BODY of the message.
>

- --
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.

------------------------------