Re: Grounding cold start:how??

["Rich Zuk" <emt@imcnyc.com>]

>Grounding the cold start valve sounds, sound. :)  During the dailing in of
>my recent engine swap the motor mechs at ND found a ground wire for the O2
>sensor's computer to be unconnected. Turns out it was ganged to a pair of
>grounding wires that were connected to the cold start injector's mounting
>bolts.  I haven't seen these spade connectors on any other car, but when I
traced
>them they seemed stock, travelled in a black loom wire tube and went around
>the firewall to the battery.
>


Okay- I'm a simpleton.  Electrical things need to be explained to me
clearly.
I looked at my cold start valve and saw two small allen blots and a hex bolt
for a fuel line.  Also the wiring harness.  How do I go about grounding this
baby.

I managed, with patience from list memebers, to learn how to add 4G
grounding wires from battery neg to chassis, to motor, to alt, to coil, then
from alt to chassis, to motor, and motor to chassis.  I think I can swing
this if you tell me how.  Thanks.
Rich


--
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.