Re: CV joints and other crap

[Jim Buck <vwpride@mixi.net>]

Brett VanSprewenburg wrote:
> 
> I pulled out my axle half-shafts last night, and I didn't enjoy it much.
> I found more broken stuff then I was prepared for.  That list to follow...

Here's how I did it.

1.  With the car jacked up, take off the big axle nuts.
2.  With someone in the car to step and lift off the brake, and the
car     in neutral, take the inner splined bolts off one at a time.
3.  Raise the inner end of the driveshaft up to allow the outer end
to     exit the wheel housing.  No problemo.  As far as those little
wafer     seals REPLACE EM!  They're cheap!

Jim
--
To subscribe or unsubscribe, send email to scirocco-L-request@privateI.com,
with your request (subscribe, unsubscribe) in the BODY of the message.