Re: Air box to throttle body

[aventari <Aventari@cts.com>]

At 04:34 PM 3/17/97 +0000, you wrote:
>Both of you are right,
>
>but running it straight puts stress on:
>
>-clutch cable
>-master cylinder
>-upper stress bar.
>
>And eventually will pop out without warning you and letting all the 
>bees, rocks, dog poop & the honda exhaust that is in front of you 
>(eeerch).
>
>But hey, I put it straight anyway :)
>
>Frank
>
>> At 11:43 PM 3/20/97 -0500, you wrote:
>> >I found it just as easy and smoother running to use 2 45deg elbows 
>> with a
>> >331/2 deg in between. It also fit better and was less stressful on the 
>> boots.
>> >
>> >Steve Toughill
>> 
>> 
>> 
>> Im confused. You removed the stock S tube and replaced it with another 
>> 3" S tube?? I installed my 3" tube from the stock boot on the fuel 
>> distributor and used a bend to connect straight to the throttle body. I 
>> figure the less turns the better the airflow will be..... 
>> 
>> 
>> 
>> 
>> Shawn

How exactly did you guys make the elbows? I really couldn't find much at
dixieline lumber, i got a straight pipe, although it doesn't really fit right. 

Kevin

--
To subscribe or unsubscribe, send email to scirocco-L-request@privateI.com,
with your request (subscribe, unsubscribe) in the BODY of the message.