Re: Blinking water led?

[brett@kodak.com (Brett VanSprewenburg)]

Replace the sending unit at the top of the coolent expansion tank.  
The tank is on the drivers side, near the strut tower.  It's got 
a two wire plug, and it just unscrews.  I had the same problem, and
replacing this sending unit fixed it.

Let me know if you need any more info.

==Brett
--
To subscribe or unsubscribe, send email to scirocco-l-request@privateI.com,
with your request (subscribe, unsubscribe) in the BODY of the message.