Re: help me one more time??

[kdbinney@juno.com (Kyle D Binney)]

Check to see about spark first.  Dont move the distributor till you do.

if no, pop open the distributor because something isnt right in there.

if yes, check to see if the #1 wire goes to where the rotor points when
the motor is at top dead center, according to the flywheel.  If it doesnt
you probably didnt get the wires on right so redo them and check firing
order.  If it does, you may then have to adjust timing by moving the
distributor.

However with nothing at all, even backfires my guess is you have no
spark.

Kyle


On Wed, 25 Jun 1997 19:15:40 +0000 "Ryan Schuermann" <rts@phoenix.net>
writes:
>Ok so I got all of my dist back together
>and hooked everythign back up..but now the 
>car just turns over..and over and over and
>wont start. I know i connected the wires
>on the right connector post off the cap, and
>I know I pu the dist back together properly,
>as the cap only fits one way (silver gound
>piece on top) and rotor is keyed....only thing
>I may have messed up was putting the bottom
>plastic thingy on 180deg around..but would
>that cuase me engine timing to be off and never 
>ever combust? Augh If i can't get my car working
>i'll have to get it towed to the shop which will defeat
>my whole purpose in trying to do this at home.
>
>ug this really pisses me off..all that work and now it
>won't even run.
>
>Ryan
>
>--
>To subscribe or unsubscribe, send email to 
>scirocco-L-request@privateI.com,
>with your request (subscribe, unsubscribe) in the BODY of the message.
>
--
To subscribe or unsubscribe, send email to scirocco-L-request@privateI.com,
with your request (subscribe, unsubscribe) in the BODY of the message.