Re: AAHH! No brakes!

[VWcrazyTim@aol.com]

In a message dated 97-02-10 16:17:59 EST, trnsfrma@ix.netcom.com (Shawn C.
Meze) writes:

<< Uh, it should only be 2 brake lines from the MC. Thats all that needs to
be 
 removed to get the old unit out and the new one in. If you dont have one,
get 
 yourself a couple of flare nut wrenches (12mm and a 13mm). These are great
in 
 getting the fittings on the brake lines loose without stripping them or
damaging 
 the lines.  >>

Ummm, Shawn, I believe it is four lines that come from the master cylender.
 Remeber, there are four sets of brakes on the car, and each one recieves
it's own line off the MC.  Now, did you mean that the MC is a dual circuit
MS?

Tim :)
--
To subscribe or unsubscribe, send email to scirocco-l-request@privateI.com,
with your request (subscribe, unsubscribe) in the BODY of the message.