Re: Best plug for 16v Scirocco? Dyno figures? 0-60?

[trnsfrma@ix.netcom.com (Shawn C. Meze)]

At 09:25 AM 4/23/97 -0500, you wrote:
>>After you get the cap off, get a grip and give it a good tug or two. It 
>>should just pull right off.
>>HTH!
>>Shawn

>   The rotor on the 16v is glued to the dist. shaft. It has to be broken
>(carefully) with a pair of pliers to remove it. The shaft should then be
>cleaned of remaining glue and fresh adhesive used for the new rotor. I
>suppose the glue is used due to the horizontal mtg. position.
>                                             Gerry


Doh! My bad. I didnt realize we were talking about a 16V rotor........



Shawn
--
To subscribe or unsubscribe, send email to scirocco-L-request@privateI.com,
with your request (subscribe, unsubscribe) in the BODY of the message.