[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Part request

Umm... Hmm.  I have none of those WUR lines at all at the moment-  CIS-E does not have them.  :P  The guy that is sending me the CIS-Basic dizzy and metering plate is sending me one of the two lines, so I'm going from what he told me.  Let me see if I can find a picture.  But yeah, just going from memory, it has a roughly 90* bend in the hard line from the top of the dizzy then I think it's a banjo on the other side on the WUR.  IIRC, it's the smaller in diameter of the two that go to the WUR.  (but I'm guessing here)  Anyone else wanna chime in?

Or, maybe I'll wait until the dizzy comes and I'll check....

Either way, thanks for looking for me!

Brendan

----- Original Message ----
From: Spewey <spewey@xxxxxxxxxxx>
To: scirocco-l@xxxxxxxxxxxx
Sent: Tuesday, September 25, 2007 2:43:13 PM
Subject: Re: Part request

Brendan Doyle wrote:
> I am "temporarily" swapping out the CIS-E components for a CIS-Basic setup on my Mk1.  I picked up the CIS-Basic dizzy for a song, but I need one fuel line- specifically the one that goes from the center of the Dizzy to the WUR.  Anybody got one laying around?

I might have one, long bent neck at the top, long run across the engine
bay?  Mine are all mixed up in a box.  Do you have a broken one to
describe or is it missing?



_______________________________________________
Scirocco-l mailing list
Scirocco-l@xxxxxxxxxxxx
http://neubayern.net/mailman/listinfo/scirocco-l







       
____________________________________________________________________________________
Take the Internet to Go: Yahoo!Go puts the Internet in your pocket: mail, news, photos & more. 
http://mobile.yahoo.com/go?refer=1GNXIC