CIS to Digifant 2 conversion

[ydrogs at gmail.com (Gordy Stedman)]

That was my fix for it also since it did not look like the digi2 injector
seals did not thread in far enough to cover the air shroud hole, but was
going to go with Timbo since he is the tech guru :)  If I epoxy the hole
there is no going back to CIS which I do not plan on doing but is nice to
have the option if ever needed.  Thanks for the input.  We are going to get
it installed this weekend so there will be pictures and stories to come.

On Nov 25, 2007 10:43 PM, Mark F. <mk1mark@xxxxxxxxx> wrote:

> On Nov 25, 2007 9:42 AM, Timbo <timjmcconnell@xxxxxxxxx> wrote:
>
> > The brackets for the digifant fuel rail bolt right on to the JH head.
> > You have to remove the plastic vaccum fitting on one side to bolt the
> > bracket down.  If you sealed the cups properly - you can just leave
> > this thing open.
>
>
> I filled the hole under the plastic fitting with two-part epoxy.
> Sealing at the injectors no longer mattered...
>
> Later,
>
> Mark.
> 75
> 82
> 82 Caddy - mTDI swap in progress
> 91 Jetta Coupe
>



-- 
Gordy
MK1 x 4