CIS to Digifant 2 conversion

[ydrogs at gmail.com (Gordy Stedman)]

On Nov 25, 2007 6:42 AM, Timbo <timjmcconnell@xxxxxxxxx> wrote:

> Digifant injectors will work in the JH head. Use a 12mm or 10mm allen
> (depends on the year) to remove the CIS inserts.  Put the Digifant
> inserts in after cleaning the holes out (make sure to remove any
> copper sealing rings)  - seal the cups in with some teflon tape to
> prevent vacuum leaks around the cups. This blocks off the vacuum
> ports.


Easy enough, will do.


> I suggest going to your FLAPS such as Advance autoparts, and buying a
> new set of 8 fuel injector o-rings.  Sometimes they even come with a
> conical tool to make that easier.


Already have new o-rings on injectors but did not get a tool


> The brackets for the digifant fuel rail bolt right on to the JH head.
> You have to remove the plastic vaccum fitting on one side to bolt the
> bracket down.  If you sealed the cups properly - you can just leave
> this thing open.


Perfect, that will make things easier.  Thanks for the tips!

-- 
Gordy
MK1 x 4